One design language.
Every surface.
Studio Luminant produces a single relief pattern across wall, ceiling, column, and feature element — cast in the right material for each. Design, modelling, moulding, casting, and finishing under one roof: fewer handoffs, fewer tolerance gaps, one point of accountability.
From concept to specification.
Most bespoke elements arrive once the design is frozen and the options are gone. We work from the concept stage: the relief becomes part of the design conversation, not a procurement afterthought. Every surface we visualise is engineered to be castable from the start — so the design you settle on is the design we deliver.
At concept stage
We visualise your relief idea for a live project, so it's on the table in the first conversation — not added at the end.
Castable by construction
Every surface we visualise is built to be cast from the start. What you settle on is what we deliver — no "that texture can't be made" surprises.
Ready for your model
Once the design is locked, build-ready BIM drops straight into your documentation — the modelling load lifts off your desk.
Design once,
deploy everywhere.
Walls, ceilings, columns, and feature elements usually come from separate vendors — each with its own tolerances, lead times, and finish variance, and the coordination falls to you. The AIAPM (AI-Assisted Product Modelling) master is material-agnostic; the geometry is held in one digital master and one silicone mould. Only the casting material changes between surfaces — so spatial coherence is engineered in from the start, not chased on site.
| Surface | Material | Why |
|---|---|---|
| Wall panels | Lumina PMAG™ | Large format, up to 3000 × 1500 mm |
| Ceiling panels | Lumina PMAG™ | Weight-sensitive applications |
| Bulkheads & soffits | Lumina PMAG™ | Continuous architectural detailing |
| Column wraps | Lumina PUCOMP™ | Complex curvatures, thin profiles 8–25 mm |
| Feature walls | Lumina PUCOMP™ | Maximum texture resolution |
| Reception desks | Lumina PUCOMP™ | Detail fidelity, lightweight |
One silicone mould captures the geometry identically. Only the casting material changes.
Two engineered formulations.
- Polymer-modified, >95% mineral by mass
- Moisture resistant, ceramic-smooth finish
- Large format — up to 3000 × 1500 mm
- Ships with BIM objects (IFC)
- Calcined at 150°C; offcuts recyclable
- Exterior and wet-area rated
- Complex curvatures achievable
- Thin profiles — 8 to 25 mm
- Maximum texture resolution
Twelve disciplines, one facility.
The breadth that makes the Unified Design System deliverable — and hard to replicate.
Ready for your model, documented.
BIM-ready
IFC objects, finish schedules, and technical data sheets for your model — they drop straight into your specification.
LuminClip™
Concealed mounting system for clean panel installation. No visible fixings.
Made-to-order
Produced per specification, with zero overproduction. EXW Sapanca; installation quoted per project where required.
Four material systems,
in the hand.
Surface quality doesn't photograph. We send a physical sample box — distinct material and finish systems you can read under your own raking light. So the specification decision is made on evidence, not on a render.
- Four distinct material and artisan-finish systems
- Free — no commitment
- With optional BIM objects and finish schedule