One design language.
Every surface.
Studio Luminant produces a single relief pattern across wall, ceiling, column, and feature element — cast in the right material for each. Design, modelling, moulding, casting, and finishing under one roof: fewer handoffs, fewer tolerance gaps, one point of accountability.
Design once,
deploy everywhere.
Walls, ceilings, columns, and feature elements usually come from separate vendors — each with its own tolerances, lead times, and finish variance, and the coordination falls to you. The AIAPM (AI-Assisted Product Modelling) master is material-agnostic; the geometry is held in one digital master and one silicone mould. Only the casting material changes between surfaces — so spatial coherence is engineered in from the start, not chased on site.
| Surface | Material | Why |
|---|---|---|
| Wall panels | Lumina PMAG™ | Large format, up to 3000 × 1500 mm |
| Ceiling panels | Lumina PMAG™ | Weight-sensitive applications |
| Bulkheads & soffits | Lumina PMAG™ | Continuous architectural detailing |
| Column wraps | Lumina PUCOMP™ | Complex curvatures, thin profiles 8–25 mm |
| Feature walls | Lumina PUCOMP™ | Maximum texture resolution |
| Reception desks | Lumina PUCOMP™ | Detail fidelity, lightweight |
One silicone mould captures the geometry identically. Only the casting material changes.
Two engineered formulations.
- Polymer-modified, >95% mineral by mass
- Moisture resistant, ceramic-smooth finish
- Large format — up to 3000 × 1500 mm
- Ships with BIM objects (IFC)
- Calcined at 150°C; offcuts recyclable
- Exterior and wet-area rated
- Complex curvatures achievable
- Thin profiles — 8 to 25 mm
- Maximum texture resolution
Twelve disciplines, one facility.
The breadth that makes the Unified Design System deliverable — and hard to replicate.
Ready for your model, documented.
BIM-ready
IFC objects, finish schedules, and technical data sheets for your model — they drop straight into your specification.
LuminClip™
Concealed mounting system for clean panel installation. No visible fixings.
Made-to-order
Produced per specification, with zero overproduction. EXW Sapanca; installation quoted per project where required.
Four material systems,
in the hand.
Surface quality doesn't photograph. We send a physical sample box — distinct material and finish systems you can read under your own raking light. So the specification decision is made on evidence, not on a render.
- Four distinct material and artisan-finish systems
- Free — no commitment
- With optional BIM objects and finish schedule